Super Systems AC20 - Manual (Page 25)

23
MODIFY MODE MODIFY MODE MODIFY MODE MODIFY MODE MODIFY MODE
1) By or push-button select the modify mode.
2) Push the MENU push-button.
If a security code is applied to the configuration parameter,
the instrument will show:
3) By and push-button set a value equal to the security
code assigned to the configuration mode (see "Configuration
security code " at page 19).
If the code is different from the security code, the instrument
automatically returns to the first configuration display
otherwise the display will show:
The modify mode is started.
This display allows you to load the default configuration
parameter (table 1 or table 2).
For more details see chapter "Default parameter" (see
Appendix A).
4) By or push-button select the OFF indication and push
the MENU push-button.
The display will show:
This is the starting display of the first group of configuration
parameters.
NOTES NOTES NOTES NOTES NOTES:
1) In the following pages we will describe all the parameters of
the instrument but the instrument will show only the
parameters related with the specific hardware and in
accordance with the specific instrument configuration [i.e.
setting OUT 6 as "nonE" (not used), all the parameters related
with this output will be automatically skipped].