Super Systems AC20 User Manual

Page 44

C.L04 Digital input In.1 status

C.L04 Digital input In.1 status
This parameter is available only if the optional card is fitted.
Upper display: VErF
Lower display: In.1
Range: Open = Input open

CLSd = Input closed

NOTE:

NOTE:The setting above described is the same for the

remaining inputs.

General note for configuration group "VErF"

General note for configuration group "VErF"
Returning in the "run time mode", the instrument restarts to
control the process, the settings performed into this group do not
affect the working settings.

NOTE:

NOTE: By pushing the or key it is possible to change

the output state. The setting above described is the

same for the remaining outputs.

C.L02 OUT 10 status

C.L02 OUT 10 status
This parameter is available only if the optional card is fitted.
Upper display: VErF
Lower display: OU.10
Range: On

= Output enabled (relay energized)

OFF

= Output disabled (relay deenergized)

NOTE:

NOTE: By pushing the or key it is possible to change

the output state. The setting above described is the

same for the remaining outputs.

C.L03 Digital input dIG.1

C.L03 Digital input dIG.1 status

status

Upper display: VErF
Lower display: dIG.1
Range: Open = Input open

CLSd = Input closed

NOTE:

NOTE:The setting above described is the same for the

remaining inputs.