Measurement Computing LogBook Series - Manual (Page 93)

LogBook User’s Manual 958396 GPS and Serial Device Data Collection 6-5
Configuration Setup Overview
Launch LogView
Setup Serial
Communications
Parameters (pg. 6-6)
Turn Channel On.
(pg. 6-6)
Select from:
• Longitude
• Latitude
• Altitude
• UTC
• Quality
(pg. 6-7)
Select Data Type (6-7):
• Integer
• Float
• Character
Yes
No
Create Format String
(pg. 6-8)
Enter User Label or leave
default (pg. 6-6)
Enter Units or leave
default (pg. 6-6)
Select Sample Rates
A, B, C, or D (see the
LogView section)
Configure other acquisition parameters,
e.g., trigger parameter, trigger and
stop events (see the
LogView section)
Download the acquisition setup to an
attached LogBook. (see the
“
Communication ” and “ Download ”
sections of the LogView section)
Enable the Readings column in the
GPS/Serial configuration grid to
validate your format strings (page 6-6)
Recommended for
First-Time setup
Repeat for each
desired serial channel.
Using
Pre-Defined
GPS-Specific
Inputs ?