Measurement Computing LogBook Series - Manual (Page 161)

Software Reference 989592 LogView LV-35
Digital & Counter Input Channel Configuration, Each Channel as a Port of Bits
The Physical Channel column identifies the actual hardware port of the physical channel.
In the User Label column, you can use the default channel names or type in a more suitable label up to
32 characters in length. These labels are saved with the collected data.
The On column can enable (On) or disable (Off) individual channels. To maximize system performance,
only channels that are enabled are sampled.
The Reading column displays the read-time value of the digital port in the format specified in the Format
column.
Analog, digital, and pulse samples are all sampled together in LogBook. This makes time correlation
possible. In the Acquisition Configuration dialog box, up to four timebases can be specified. A digital or
pulse channel can be sampled at any or all of these timebases.
Channels sampled only to derive calculated channels, or to simulate outputs do not need to
be stored.
Output Channels Configuration
The Output spreadsheet shows all of the currently available digital and analog output channels. Each
output channel requires a source channel to feed it. Source channels can be chosen from an analog
input for an analog output for from a digital input for a digital output.
Output Channel Configuration Window