Measurement Computing LogBook Series - Manual (Page 173)

Software Reference 989592 LogView LV-47
Device Menu
Select PC Card
Select LogBook
Attach
Break
Arm Acquisition
Stop Acquisition
LogBook Monitor
Explorer
The Device menu allows you to choose devices in your system, attach or break connection to the
system, and to start and stop an acquisition.
Select
PC-Card
(no toolbar icon)
Select PC-Card allows you to choose which drive
on your computer you wish to make active for
uploading and downloading—especially relevant if
your computer has more than one PC-Card slot.
Select PC-Card
Select
LogBook
(no toolbar icon)
Select LogBook allows you to choose devices from
your system and then verify or change the
communication port settings.
Select LogBook
Attach allows you to establish connection with a LogBook. If no LogBook is connected, LogView will
automatically attach to a PC-Card in the user-specified PC-Card drive
(specified in the “Select PC-Card” dialog box).
Break allows you to break the connection with an attached LogBook.
Arm Acquisition Arms the acquisition for the selected device. The scan will begin when the selected
trigger condition is met.
Stop Acquisition will disarm the acquisition for the selected device. No data will be collected despite
trigger conditions until the acquisition is armed (started).