Measurement Computing LogBook Series - Manual (Page 34)

LogBook/360 Quick Start Guide QS360 -
1
LogBook/360 Quick Start Guide
Software Installation ……
QS360
-1
Setting Up the Card Drawer …… QS360 -3
Connecting the LogBook/360 to the PC,
External DBKs, and Power …… QS360 -6
Hardware Configuration ……
QS360
-7
LogBook/360 Device Configuration… QS360 -8
Testing the Hardware …… QS360 -10
Acquisition Configuration ……
QS360
-10
A Note About Calibration …… QS360 -11
Before you get started
verify that you have the following items.
LogBook/300
TR-40U Power Supply
Serial/Parallel Patch Cable, or PC Card Reader
PC with ECP (Enhanced Capabilities Port)
Data Acquisition CD
Monitor: SVGA, 1024 x 768 screen resolution
Windows 2000 SP4 and Windows XP users:
PC with I ntel ™ Pentium [or equivalent], 1 GHz;
512
MB memory; 10 GB disk space
Windows Vista users:
PC must be Windows Vista Premium Ready
Software Installation
1. Close all running applications on the host PC.
2. Remove previous version drivers, if present. You can do this through Microsoft’s Add/Remove Programs
feature.
3. Insert the Data Acquisition CD (8.1.2 or higher) into your CD-ROM drive and wait for the PC to auto-run. An
Opening Screen will appear. If AutoRun is disabled: (a) right click Windows Start menu, (b) select Explore; and
(c) double-click MasterSetup.exe. As an alternative to using the CD, you can download software from:
www.mccdaq.com/products/software.aspx.
4. Click the <ENTER SETUP> button.
Note: If you are downloading software from our website, follow instructions provided there.
5. From the hardware selection screen, select your data acquisition device then follow the on-screen instructions.
Note: To enable all LogView features:
(a) From LogView’s main window, open the File pull-down menu,
(b) select Authorization,
(c) enter ED7B55484273 in the dialog box and apply the code.
LogBook/360 combines the features and capabilities of LogBook/300 with a DBK60 expansion chassis. The lower
portion of the front panel has three male DB37 connectors (P1, P2, and P3) for system expansion, and a post for
connecting to CHASSIS ground. The upper section is nearly identical to LogBook/300.
LogBook/360, Front Panel
IMPORTANT! Software must be installed first!