Measurement Computing LogBook Series - Manual (Page 181)

Software Reference 989592 LogView LV-55
Digital
Meters
(no toolbar
icon)
Selecting the Digital Meters icon brings
up the Digital Meters window to display
several channels in numeric format. To
activate the display, select the
button on the left side of the toolbar (or
Start All Indicators in the pull-down
menu or in the toolbar). You can vary the
number of channels (32 max) displayed
by selecting the input box at the end of
the toolbar. The button (next to
last item on toolbar) is used to arrange the
display for convenient reading. The
pushpin icon in the center of the toolbar
locks this window on top of other
windows until you unlock it by selecting
the pushpin again.
Meters Configuration
The toolbars and pull-down menus for the three meter
types are identical except that Digital Meters does not
have a Reset Peak Hold icon.
Meters Toolbar Icons
Item Name Function
Start Starts meters.
Stop Stops meters.
Reset Peak Hold
Indicator
Resets the floating markers. Upon reset, the markers will instantly adjust to
indicate the highest and lowest values reached since the time of the reset.
This feature does not apply to the Digital Meters.
Stay On Top
(Push pin) Locks or unlocks the meter window on top of other windows.
Print Sends the meter(s) display image to connected printer.
Rows x Columns Opens a small menu with “row x column” arrangement options. Example: When
the number of meters is 6 the grid options will be: 6x1, 3x2, 2x3, and 2x4 with
the first number being the number of rows. If you then select 3x2 you will have
3 rows of meters with 2 meters per row.
Number of Meters Specifies the number of meters to appear on the screen.
Up to 32 meters can be selected.
The meters windows each have a Control and View pull-down menu, as indicated by the following figure.
These menu items correspond to the toolbar icons described above.