Control-panel functions – Measurement Computing LogBook Series User Manual
Page 82
5-6 LBK and other non-DBK Options
919495
LogBook User’s Manual
Control-Panel Functions
LBK1, Remote Terminal
Menu Select Keys () – Located just below the display screen, these keys access the various menus.
On - Turns power ON to the LogBook. As an indication of power status, legible characters or the LCD backlight shows
that LogBook power is on.
Off - Turns power OFF to the LogBook. To prevent accidental shutdown, the user must confirm the “off” request if so
configured in the Terminal Configuration submenu.
Select/up/down - Moves the cursor up and down menu to select a particular parameter or function.
Edit/left/right - Views and selects among pre-programmed parameter values; Increases (right) or decreases (left) the
numeric quantity.
Enter - Resets parameter values as shown; performs current operation.
Cancel - Discards current operation and restores previous state as last saved.
Start/Stop - Starts an acquisition from idle, or stops an on-going acquisition.
Numeric keypad - Allows entry of signed (+/-) decimal (
∗) numbers for setting various parameters.
Manual Trigger - Generates a manual trigger to begin a scan sequence.
Event Mark - Generates an event marker. LogBook records the exact time (to the nearest scan) at which the operator
presses the Event Mark button. These marks can be viewed on a PC with the use of a view program such as
eZ-PostView.
Remote LogBook Terminal
Main Menu
System Time : 11/ 01 /2000 11:50:25
Acq State : Wait for Trig
Acq Name : Test 1
Acq Sys Chan Sys Term
*****
Conf State State Conf Conf
*****