Flowchart of a simple acquisition, Using an attached logbook – Measurement Computing LogBook Series User Manual

Page 138

LV-12 LogView

989592

Software

Reference

Flowchart of a Simple Acquisition

Consider the flowchart of a simple data acquisition. Whether LogBook is attached or unattached, the
process is similar except for downloading and uploading. You begin the process in LogView by defining
the parameters for an acquisition.

Using an Attached LogBook

When using an attached LogBook, LogView communicates directly to the PC-Card in LogBook through
the communication interface (serial or parallel).

After LogView recognizes the attached LogBook, an acquisition setup file can be downloaded to LogBook.
After the acquisition, data can be uploaded from LogBook without handling the PC-Card.
Note that steps 1 through 4 are often done during the initial installation.

This manual is related to the following products:

LogBook 300 LogBook 360 LogBook 300 rev.7.0 LogBook 360 rev.7.0 LogBook 360 rev.3.0 LogBook 300 rev.3.0