Gasboy Atlas Fuel Systems Owner Manual - Manual (Page 74)

The Atlas Fuel System Preventive Maintenance
Page 70 MDE-4363F Atlas™ Fuel Systems Owner’s Manual · September 2011
Wash pump/dispenser As required Clean with automobile cleaning products. Clean plastic surfaces
and poly carbonate graphics with water and mild detergent. Do
not wash with a hose. Do not use window cleaner with Ammonia
on Electronic display windows.
Adhere to the following guidelines for washing the
pumps/dispensers:
• Clean and protect your equipment with automobile cleaning and
protection products.
• Clean plastic surfaces and poly carbonate graphics with a
solution of water and mild detergent.
• Use a soft cloth, paper towel, or sponge to clean displays
separately. Window cleaners are preferred.
• Wash pumps/dispensers by hand, or use a hose nozzle set to a
fine gentle spray.
Owner
Note: Gasboy recommends more frequent
cleaning for pumps/dispensers located in
salty or corrosive environments, such as
near the ocean or near pollution sources.
Display windows As required Clean with nonabrasive cloth or paper towel with commercial
glass cleaner. Do not use window cleaner with Ammonia. Do
not wax or use any abrasive cleaners or fuels. Owner
Components
Recommended
Frequency
Recommended Maintenance
Who Performs the
Inspection/Repair
CAUTION
Moisture can damage the internal components of a pump/dispenser.
Internal components exposed to moisture may not operate correctly.
Do not use a pressure washer to clean the pumps/dispensers.
CAUTION
The exterior surface of Gasboy pumps/dispensers can become damaged
if cleaned with harsh cleaners.
Harsh cleaners can damage the units, adversely affecting the appearance
of the units.
Do not use solvents, harsh detergents, degreasers, steel wool, abrasive
cleaners, or petroleum-based solvents on the pumps/dispensers.