Gasboy Atlas Fuel Systems Owner Manual - Manual (Page 15)

MDE-4363F Atlas™ Fuel Systems Owner’s Manual · September 2011 Page 11
General Description of 9100K The Atlas Fuel System
General Description of 9100K
The Gasboy Series 9100K dispensing units are UL-listed and are available in a self-contained
(suction pump) package or in a remote-controlled (dispenser) package. Both packages offer
varieties of models which are available as single hose outlets or dual hose outlets (with single
or dual product capability). The self-contained models are available in standard speed, up to
56 LPM/15 GPM; in high speed, up to 83 LPM/22 GPM; or in a single hose model with high
capacity speed, up to 99 LPM/26 GPM. The rate of delivery for the remote-controlled
packages will vary according to the size of the submersible pump. The delivery rate of both
packages will also vary depending on the installation conditions and added accessories.
All models of the Series 9100K offer mechanical non-computers complete with electric resets.
Mechanical pump registers show the total volume for a delivery. All non-computers will read
up to 999.9 gallons or liters.
Common Functions
This subsection provides instructions for common functions on the Gasboy Atlas
pumps/dispensers.
Understanding Date Codes
A two letter date code is stamped on the serial number plate before the serial number. This
code shows the month and year of manufacture. To determine the age of the equipment for
warranty purposes, refer to the date code.
Figure 3-5: Serial Number Plate
Serial Number