Gasboy Atlas Fuel Systems Owner Manual - Manual (Page 67)

MDE-4363F Atlas™ Fuel Systems Owner’s Manual · September 2011 Page 63
Preventive Maintenance The Atlas Fuel System
Leaks, external Once a week, or
as notified about
a potential leak 1 Inspect the following for any signs of damage or leaks, such
as cracks or cuts:
• Couplings
• Hose outlet castings
• Swivels
2 Review all documentation provided by each component’s
manufacturer.
3 If you find any leak, stop using the pump/dispenser and
make arrangements to repair the leak.
• Owner—Inspect
• ASC only—Repair
and test
Displays
(Electro/Mechanical Units) Once a week 1 Inspect displays for proper reading of all digits.
2 Verify that displays are properly backlit.
• Owner—Inspect
• ASC Repair and test
Components
Recommended
Frequency
Recommended Maintenance
Who Performs the
Inspection/Repair
WARNING
Leaking fuel can be ignited, causing a fire or explosion.
Fire, explosion, or electrical shock could result in severe injury or death if
you continue to use damaged pumps/dispensers.
If you find any leak or damage, stop using the pump/dispenser and contact
your local ASC.
WARNING
The pump/dispenser contains pressurized flammable fuel and lethal
voltages.
Servicing a Gasboy unit incorrectly could result in severe injury or death.
Do not attempt to service Gasboy pump/dispenser yourself and do not allow
untrained personnel to service Gasboy pumps/dispensers. Only
Gasboy-trained ASCs must service a Gasboy unit.