Gasboy Atlas Fuel Systems Owner Manual - Manual (Page 5)

MDE-4363F Atlas™ Fuel Systems Owner’s Manual · September 2011 Page 1
Purpose Introduction
1 – Introduction
Purpose
This manual provides instructions for safely operating, programming, and maintaining the
Atlas
™ Fuel Systems pumps/dispensers.
Intended Users
This manual is written for the owners and the operators of the Atlas Fuel Systems pumps and
dispensers.
Scope
This manual provides the following information about the Atlas Fuel Systems pumps and
dispensers:
• Operating the pumps/dispensers
• Preparing the pumps/dispensers for service
• Maintaining the pumps/dispensers
Certain special alternative fuels such as E85 and additives can degrade pump/dispenser
performance or integrity if the dispensers are not designed for use with such fuels.
Additionally, converting to certain standard fuels (gasoline, diesel, kerosene, and so on)
from alternative fuels such as those with ethanol (E85), methanol, or Biodiesel or from
alternative fuels to standard fuels can degrade dispenser performance or integrity.
Similar effects can also occur when converting units to different standard fuel types. As
per UL
® 87A requirements, nozzles dispensing E85 fuel and DEF must not be used
to dispense any other type of fuel such as Gasoline.
Leaks and potential environmental hazards can result or components may fail
prematurely.
To avoid these issues, follow the guidelines provided for dispensing E85 fuel and DEF in
this manual and MDE-4331K Atlas Fuel Systems Installation Manual.
CAUTION