Gasboy Atlas Fuel Systems Owner Manual - Manual (Page 66)

The Atlas Fuel System Preventive Maintenance
Page 62 MDE-4363F Atlas™ Fuel Systems Owner’s Manual · September 2011
Nozzles and boot area Once a week or
as notified about
a potential
problem 1 Inspect nozzles for the following wear or damage:
• Damage
• Leaks
• Loose nozzle spouts
• Missing parts, such as retainer springs and splash guards • Owner—Inspect
• ASC only—Repair
and test
2 Inspect vapor recovery boots (bellows) for proper seal and
damage.
3 Consult the nozzle manufacturer for any additional required
inspections.
4 If repair is required, call an ASC.
Components
Recommended
Frequency
Recommended Maintenance
Who Performs the
Inspection/Repair
WARNING
Leaking fuel can be ignited, causing a fire or explosion.
Fire, explosion, or electrical shock could result in severe injury or death if
you continue to use damaged pumps/dispensers.
If you find any leak or damage, stop using the pump/dispenser and contact
your local ASC.
WARNING
The pump/dispenser contains pressurized flammable fuel and lethal
voltages.
Servicing a Gasboy unit incorrectly could result in severe injury or death.
Do not attempt to service Gasboy pump/dispenser yourself and do not
allow untrained personnel to service Gasboy pumps/dispensers. Only
Gasboy-trained ASCs must service a Gasboy unit.