Comtech EF Data LBC-4000 - Manual (Page 96)

LBC-4000 L-Band Up/Down Converter System with Ethernet Revision 2
Ethernet-based Remote Product Management MN-LBC4000A
6–20
6.4.5.3.2 Config | Ref
Use this page to review the operational parameters of, and to adjust, the reference oscillator.
Figure 6-7. Config | Ref page
Reference Oscillator
• External Reference Freq. (read‐only) – When an external reference oscillator is connected,
its operational value (i.e., 5 MHz or 10 MHz) is displayed here.
• Reference Tuning (VDC) (read‐only) – The currently defined Reference Frequency tuning
adjustment is displayed here.
• External Reference Lock (read‐only) – The External Reference Lock state is displayed here.
• Tuning Adjustment – Enter a numeric value for the reference oscillator tuning voltage here.
The default value is 087, with allowable values from 0 to 255.
Click [Submit] to save these changes.
To update the page with the latest available values, click [Refresh].