Comtech EF Data LBC-4000 - Manual (Page 136)

LBC-4000 L-Band Up/Down Converter System with Ethernet Revision 2
Appendix B MN-LBC4000A
B–6
B.3.3 CONFIG: REDUND (Redundancy)
Redundancy
Mode State FrcBkup
Use the [←][→] arrow keys to select Mode, State, or FrcBkup, and then press [ENT].
CONFIG: Redundancy
Æ Mode
Redundancy
Control Mode = Manual
Use the [↑][↓] arrow keys to select Manual or Auto, and then press [ENT].
Note that, if you attempt to access this menu and the Redundancy State is selected as
Disabled, the following message displays:
Not in Redundancy
Mode!
CONFIG: Redundancy Æ State
Redundancy Mode:
Control State = Enable
Use the [↑][↓] arrow keys to select Disable or Enable, and then press [ENT].
CONFIG: Redundancy Æ FrcBkup
Config Manual Redundancy
Force Backup NO
To force the redundant unit into standby mode, use the [↑][↓] arrow keys to select YES or NO.
Press [ENT] when done.
Note that, if you attempt to access this menu and the Redundancy State is selected as
Disabled, the following message displays:
Not Available in
Current Mode