Comtech EF Data LBC-4000 - Manual (Page 72)

LBC-4000 L-Band Up/Down Converter System with Ethernet Revision 2
Front Panel Operation MN-LBC4000A
5–16
5.2.4.1 UTILITY: TIME
Edit real-Time Clock:
11:59:13 12/02/08
To edit the time and date settings of the real‐time clock: Use the [←][→] arrow keys to select
the digit to be edited, and then use the [↑][↓] arrow keys to change its value:
• The time
t= is entered in military format; that is, in the form hh:mm:ss (00‐23 hours:00‐
59 minutes:00‐59 seconds).
• The date
d= is entered in mm/dd/yy format (01‐12 month/01‐31 day/00‐99 year).
Press [ENT] when done.
5.2.4.2 UTILITY: DISP (Display Brightness)
VFD Display Brightness:
100%
To edit the display brightness: Use the [↑][↓] arrow keys to select a brightness value of 25%,
50%, 75%, or 100%.
Press [ENT] when the brightness is suitable.
5.2.4.3 UTILITY: FIRMWARE
Firmware Images:
INFO SELECT
This series of submenus permits you to view information about the LBC‐4000 internal firmware.
The converter can store two complete firmware images, and you can select which image will be
loaded the next time the unit reboots.
Use the [←][→] arrow keys to select INFO or SELECT, and then press [ENT].
UTILITY: FIRMWARE Æ INFO
Firmware Info: BOOTROM
IMAGE#1 IMAGE#2
Use the [←][→] arrow keys to select BOOTROM, IMAGE#1 or IMAGE#2, and then press [ENT]
to view the information. Typical for each screen, the firmware number, its version (e.g., 1.2.3 =
FW Ver. 1.2.3) and the release date are provided.