Comtech EF Data LBC-4000 - Manual (Page 80)

LBC-4000 L-Band Up/Down Converter System with Ethernet Revision 2
Ethernet-based Remote Product Management MN-LBC4000A
6–4
Type the SNMP Community String into the user‐supplied MIB Browser or Network Node
Management software. You may define three Community Strings for SNMP access:
• Read Community
default = public
• Write Community
default = private
• Trap Community
default = comtech
For proper SNMP operation, the LBC‐4000 MIB files must be used with the
associated version of the LBC‐4000 Remote Router M&C. Refer to the LBC‐4000 FW
Release Notes for information on the required FW/SW compatibility.
6.2.3 SNMP Traps
The LBC‐4000 supports both SNMPv1 traps and SNMPv2 notifications. The LBC‐4000 has the
ability to send out SNMP traps when certain faults occur in the unit. A trap is sent both when a
fault occurs and when a fault clears. Which style of traps the LBC‐4000 sends can be configured
using the LBC‐4000SNMPTrapVersion OID.
MIB2 SNMPv1traps and SNMPv2 notifications are supported by the LBC‐4000.