Comtech EF Data LBC-4000 - Manual (Page 78)

LBC-4000 L-Band Up/Down Converter System with Ethernet Revision 2
Ethernet-based Remote Product Management MN-LBC4000A
6–2
6.1.1 Ethernet Management Interface Protocols
For SNMP, Telnet, or HTTP operation, the LBC‐4000 must be configured with the
Ethernet control option. Via the front panel, select CONFIG: Remote Control Æ
Ethernet. See Chapter 5. FRONT PANEL OPERATION for further information.
The user PC facilitates access to Ethernet‐based remote Monitor and Control (M&C) of the
LBC‐4000 through three separately operated protocols:
• Simple Network Management Protocol (SNMP). This requires a user‐supplied Network
Management System (NMS) and a user‐supplied Management Information Base (MIB) File
Browser.
• Telnet Interface. This requires use of the user PC’s Command‐line interface, or a user‐
supplied terminal emulation program such as HyperTerminal.
• LBC‐4000 Web Server (HTTP) Interface. This requires a compatible user‐supplied web
browser such as Internet Explorer.