Comtech EF Data LBC-4000 - Manual (Page 92)

LBC-4000 L-Band Up/Down Converter System with Ethernet Revision 2
Ethernet-based Remote Product Management MN-LBC4000A
6–16
6.4.5.2.2 Admin | SNMP
Use this page to set and returns administration information for the LBC‐4000 Simple Network
Management Protocol (SNMP) feature.
Figure 6-5. Admin | SNMP page
SNMP
• Simple Network Management Operational Status: Use the drop‐down menu to select the
Simple Network Management operational setting as Enabled or Disabled.
• The SNMP Read and Write Community String fields can be any combination of characters
and a length of 0 ‐ 20 characters:
o The factory default for the Read Community String parameter is public.
o The factory default Write Community String is private.
• Enable Authentication Trap: Use the drop‐down menu to select the Enable Authentication
Trap operational setting as Enabled or Disabled.
• The Administrator can assign up to two SNMP Trap IP addresses and one SNMP Trap
Community String. The SNMP Trap Community String field can be any combination of
characters and a length of 0 ‐ 20 characters:
o
The factory default for the Trap Community String is comtech.
• Trap Version: Use the drop‐down menu to select the SNMP Trap Version as SNMPv1 or
SNMPv2.
For details pertaining to the remaining configuration parameters available on this page, see
Sect. 6.3 SNMP INTERFACE.