Comtech EF Data LBC-4000 - Manual (Page 65)

LBC-4000 L-Band Up/Down Converter System with Ethernet Revision 2
Front Panel Operation MN-LBC4000A
5–9
ADDRESS GATEWAY SNMP
MAC = 00-06-B0-00-02-D9
Use the [←][→] arrow keys to select ADDRESS, GATEWAY, or SNMP, and then press [ENT].
The MAC Address is set at the factory and is read‐only.
When ADDRESS is selected:
IP Address/Range:
192.168.001.004/24
To edit the IP Address and Range for the Ethernet M&C port for this unit: Use the [←][→] arrow
keys to select a digit to edit, and then use the [↑][↓] arrow keys to change its value. Press [ENT]
when done.
Press [ENT] when done.
When GATEWAY is selected:
Ethernet IP Gateway:
192.168.001.005
To edit the IP Gateway Address for the Ethernet M&C port for this unit: Use the [←][→] arrow
keys to select a digit to edit, and then use the [↑][↓] arrow keys to change its value. Press [ENT]
when done.
When SNMP is selected:
COMMUNITIES TRAPS
Use the [←][→] arrow keys to select COMMUNITIES or TRAPS, and then press [ENT].
CONFIG: ETHERNET
Æ SNMP Æ COMMUNITIES
SNMP Communities:
READ WRITE TRAP
Use the [←][→] arrow keys to select READ, WRITE or TRAP, and then press [ENT].
When READ is selected:
Read Community:
Public