Comtech EF Data LBC-4000 - Manual (Page 12)

LBC-4000 L-Band Up/Down Converter System with Ethernet Revision 2
Preface MN-LBC4000A
x
Examples of Multi-Hazard Notices
Recommended Standard Designations
Recommended Standard (RS) Designations have been superseded by the new designation of the
Electronic Industries Association (EIA). References to the old RS designation (e.g., RS‐232) may
appear when depicting actual text on the serial or Web Server interfaces or the physical unit (e.g.,
front panel menus or rear panel labeling). All other references in the manual specify the EIA
designations.
Metric Conversion
Comtech EF Data provides non‐Metric to Metric conversions tables on the inside back cover of
this manual to assist the operator in cross‐referencing such information.
Carefully review the following information:
Safety and Compliance
Electrical Safety and Compliance
The unit complies with the EN 60950 Safety of Information Technology Equipment (Including
Electrical Business Machines) safety standard.
IF THE UNIT IS OPERATED IN A VEHICLE OR MOVABLE INSTALLATION, MAKE SURE
THE UNIT IS STABLE. OTHERWISE, EN 60950 SAFETY IS NOT GUARANTEED.
Electrical Installation
CONNECT THE UNIT TO A POWER SYSTEM THAT HAS SEPARATE GROUND, LINE AND
NEUTRAL CONDUCTORS. DO NOT CONNECT THE UNIT WITHOUT A DIRECT
CONNECTION TO GROUND.