Comtech EF Data LBC-4000 - Manual (Page 69)

LBC-4000 L-Band Up/Down Converter System with Ethernet Revision 2
Front Panel Operation MN-LBC4000A
5–13
5.2.2 MONITOR
Use the[↑][↓] arrow keys to view monitor menu choices shown.
For all read‐only Monitor displays, press [ENT] or [CLR] to return to the previous menu.
The following table identifies each read‐only display available from the Monitor menu branch,
including a sample screen and a functional description of the display:
Submenu Example Description
Conv-A
Monitor A: iflo=08.2
rflo=01.6 tp=+32.1
For Converter Unit A or B: The operating
parameters for the selected Up/Down-
converter IDU are shown, where:
iflo = IF Lockout
rflo = RF Lockout
tp = Operating Temp (°C)
Conv-B
Monitor B: iflo=08.1
rflo=01.6 tp=+30.2
RefOsc
MON Ref Osc:
Vtune=04.7
The raw voltage of the voltage tuning monitor
is shown.
Note: This display is used for debugging
purposes only.
PwrSupA
Monitor PS A: 12V=12.3
8V=08.2 5V=05.3
Where ‘X’ denotes Power Supply ‘A’ or ‘B’:
The 12V, 8V, and 5V values for the selected
power supply are shown.
PwrSupB
Monitor PS B: 12V=12.2
8V=08.1 5V=05.3