Comtech EF Data LBC-4000 - Manual (Page 91)

LBC-4000 L-Band Up/Down Converter System with Ethernet Revision 2
Ethernet-based Remote Product Management MN-LBC4000A
6–15
Click [Change IP Address] to save these changes. If you wish to revert to the previously assigned
IP Gateway and IP Address/Range, click [Reset] instead.
System Account Access Information
• Admin, Read/Write, and Read Only Names and Passwords:
The factory defaults for these names/passwords are:
o
Admin comtech/comtech
o Read/Write opcenter/1234
o Read Only monitor/1234
Note the following:
o These Name fields can be any alphanumeric combination with a maximum length of
10 characters.
o These Password fields can be any alphanumeric combination with a maximum
length of 10 characters.
• SMTP Server: Specify the mail server IP address from where you want to send the
e‐mail.
• SMTP Domain Name / Destination: The Administrator can assign the SMTP Domain
Name and Destination. This is required if the e‐mail feature of the Home | Support page
(Sect. 6.4.3.1.3) is to be used.
o For SMTP Domain Name, specify the domain of the e‐mail server (usually found to
the right of the @ symbol in an e‐mail address).
o For SMTP Domain Destination, specify the e‐mail recipient name (usually found to
the left of the @ symbol in an e‐mail address).
Click [Submit Access] to save these changes. If you wish to revert to the previously assigned
System Account Access Information, click [Reset] instead.
To update the page with its latest operating parameters, click [Refresh].