Comtech EF Data LBC-4000 - Manual (Page 101)

LBC-4000 L-Band Up/Down Converter System with Ethernet Revision 2
Ethernet-based Remote Product Management MN-LBC4000A
6–25
Converter A / Converter B Status section
This section identifies the converter installed in each module slot (BUC or BDC) and each
module’s associated RF conversion band and frequency, attenuation value, mute status, and
online/offline status.
Converter A / B, Power Supply A / B Monitor and Status section
This section provides the current monitored value for each module (BUC or BDC), including the
RF/IF lockout status, operating voltages and temperatures. The operating voltages for each
power supply are also provided.
Note the following:
• Valid Converter A/Converter B LNA Current readings are provided only if the pertinent
LBC‐4000 Down Converter (BDC) is optionally configured with an LNA. These parameters
otherwise will display as N/A if the pertinent converter is a BUC.
• Valid Converter A/Converter B Forward RF Power readings are provided only if the
pertinent LBC‐4000 up converter (BUC) is optionally configured with the Power Monitor
feature. These parameters otherwise will display as N/A if the pertinent converter is a
BDC.
• Valid Power Supply 2 and Local Switch Position information is provided with redundant
configurations only.
To update the page with the latest available parameters, click [Refresh].