Comtech EF Data LBC-4000 - Manual (Page 32)

LBC-4000 L-Band Up/Down Converter System with Ethernet Revision 2
Installation MN-LBC4000A
2–6
2.2.2 Installing the Optional Side-Mounting Bearingless Rack Slide Set
The optional Bearingless Rack Slide Set may be installed into the equipment rack cabinet and
onto the sides of the LBC‐4000 as shown in Figure 2‐4 and per the following procedure:
Step Task
1
Use the provided mounting hardware to install one slide onto each side of the LBC-4000
chassis.
2
Use the provided mounting hardware to install the slide rail components into each interior
side of the equipment rack cabinet.
3
Mount the unit into the front of the equipment rack. Ensure that the slides properly engage
the cabinet-mounted slide rails.
4
Continue to slide the converter into the equipment rack to its final operating position. Then,
use four user-provided screws to secure the converter to the equipment rack’s right and
left threaded front mounting rails (through the front panel mounting slots).
CEFD Part Number Description
FP/SL0007 Bearingless Rack Slide Set – 22”
FP/SL0008 Bearingless Rack Slide Set – 24”
FP/SL0006 Bearingless Rack Slide Set – 26”
Figure 2-4. Installing the Optional Side-Mounting Bearingless Rack Slide Set