4 web server (http) interface, 1 enabling the web server interface – Comtech EF Data LBC-4000 User Manual
Page 83

LBC-4000 L-Band Up/Down Converter System with Ethernet
Revision 2
Ethernet-based Remote Product Management
MN-LBC4000A
6–7
6.4
Web Server (HTTP) Interface
A user‐supplied web browser allows the full monitor and control (M&C) of the LBC‐4000 through
its Web Server Interface. This embedded web application is designed for, and works best with,
Microsoft’s Internet Explorer Version 5.5 or higher (the examples shown use Internet Explorer
Version 7.0).
See Chapter 5. FRONT PANEL OPERATION or the Remote Commands Specifications tables found
in Chapter 7. SERIAL‐BASED REMOTE PRODUCT MANAGEMENT for detailed descriptions of many
of the functions depicted throughout Sect. 6.4.5 Web Server Page Descriptions.
6.4.1
Enabling the Web Server Interface
The IP Address can be verified from the front panel menus: CONFIG: Remote
Control
Æ Ethernet Æ Address. See Chapter 5. FRONT PANEL OPERATION for
complete details about using this M&C interface.
To enable the Web Server Interface in the LBC‐4000 using only a 100BaseTx remote interface
(this assumes you are running Microsoft Windows OS):
1. Select Start, then Run,
then type “cmd” to open
the command prompt
window:
2. Start a Telnet session
with the unit at the
default IP address of
192.168.1.4:
3. Enter the Telnet
username and password
(the default for both
parameters is comtech):
Failure to enter the correct User name and Password will return you to a blank login screen.