Comtech EF Data SFC1800A - Manual (Page 99)

SFC1800A Synthesized Frequency Upconverter Appendix B
TM111 – Rev. 1.0 B- 7
"Learn Prime converter or learn All. Causes the Backup unit to 'Learn'
all the settings of the selected Primes. The Backup can only backup a
Prime that it has learned."
::= { radConverterSwitchNVStatus 2 }
radConverterSwitchBackupTest OBJECT-TYPE
SYNTAX PrimeControlType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Checks if Prime can be backed up."
::= { radConverterSwitchNVStatus 3 }
radConverterSwitchForceBackup OBJECT-TYPE
SYNTAX INTEGER (0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Force a manual backup (select 1..8), or unback of a Prime (select 0).
When in Manual Backup Mode, this selection will force the selected Prime
to be backed up. Unback will release any Prime that is currently backed
up."
::= { radConverterSwitchNVStatus 4 }
radConverterSwitchPriority OBJECT-TYPE
SYNTAX INTEGER (0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Prime converter priority. Sets the switching priority of a Prime unit.
If more than one unit fails at the same time, the higher priority unit
will be backed up. Also, if one unit is currently backed up and a second
unit with a higher priority fails, the first unit will be unbacked and
the second unit will be backed up (but only if Backup Mode is
Auto-Revertive, see 1. above). The priority is set as follows.
0 = No priority (the switch will ignore the Downconverter).
1 = Highest priority.
8 = Lowest priority."
::= { radConverterSwitchNVStatus 5 }
radConverterSwitchCompensationControl OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the Prime converter compensation, ENABLE/DISABLE."
::= { radConverterSwitchNVStatus 6 }
radConverterSwitchCompensation OBJECT-TYPE
SYNTAX INTEGER (-50..+50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Prime converter compensation of -5.0 dB to +5.0 dB (Implied decimal
point).
Offsets the gain of the Backup unit to account for variations in loss
through the system.
This allows the user to ensure that the signal path of a particular Prime
Converter maintains the same output power when backed up."
::= { radConverterSwitchNVStatus 7 }
radConverterSwitchFaultDelay OBJECT-TYPE
SYNTAX INTEGER (50..10000 )