Comtech EF Data SFC1800A - Manual (Page 103)

SFC1800A Synthesized Frequency Upconverter Appendix B
TM111 – Rev. 1.0 B- 11
Bit 0 = Prime 1
Bit 1 = Prime 2
Bit 2 = Prime 3
Bit 3 = Prime 4
Bit 4 = Prime 5
Bit 5 = Prime 6
Bit 6 = Prime 7
Bit 7 = Prime 8
0 = No Power Present, 1 = Power Present"
::= { radConverterSwitchStatus 10 }
radConverterSwitchBackedupPrime OBJECT-TYPE
SYNTAX INTEGER (0..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the currently backed up prime. 0 means no converters are
currently backed up."
::= { radConverterSwitchStatus 11}
radConverterSwitchHotStandbyPrime OBJECT-TYPE
SYNTAX INTEGER (0..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the current prime converter in hot standby. 0 means no converter
is currently in hot standby. This is valid only in automatic backup modes."
::= { radConverterSwitchStatus 12 }
-- --------------------------------------------------------------------------------------------------------------------
-- --------------------------------------------------------------------------------------------------------------------
-- Converter common non-volatile status information.
radConverterCommonControlMode OBJECT-TYPE
SYNTAX INTEGER {
front_panel(1),
terminal(2),
remote(3),
ethernet(4),
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { radConverterCommonNVStatus 1 }
radConverterCommonTerminalBaudRate OBJECT-TYPE
SYNTAX INTEGER {
baud_2400(1),
baud_9600(2),
baud_19200(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects terminal baud rate."
::= { radConverterCommonNVStatus 2 }
radConverterCommonTerminalEmulation OBJECT-TYPE
SYNTAX INTEGER {
vt100(1),
wyse50(2),
addsvp(3)
}
MAX-ACCESS read-write
STATUS current