Artesyn ATCA-9405 Installation and Use (May 2014) - Manual (Page 89)

Chapter 5
ATCA-9405 Installation and Use (6806800M71G) 89
Ethernet Infrastructure
5.1 Overview
The Ethernet infrastructure on ATCA-9405 provides switching between any on-board Ethernet
port, the ATCA base and fabric interface, and the Ethernet ports provided through RTM.
Separate networks for control and data planes are implemented using VLAN and port based
filters, inside the Ethernet switch device.
Table 5-1 Data Plane, Control Plane, and Other Interfaces
Data Plane (DP) Control Plane (CP) Others
40 GbE connection to
redundant Fabric Interface 1 GbE connection to redundant
base interface
60 GbE connection to each
Packet Processor (PP) 1 GbE connection to each
Packet Processor (PP) 1 GbE connection from each
Packet Processor (PP) to Face
Plate
1 GbE connection to Service
Processor (SP) 1 GbE connection to Service
Processor (SP) 1 GbE connection from Service
Processor (SP) to Face Plate
160 GbE connection to RTM Dual 1 GbE connection to RTM
20 GbE connection to Update
Channel