Artesyn ATCA-9405 Installation and Use (May 2014) - Manual (Page 54)

Setup
ATCA-9405 Installation and Use (6806800M71G) 54
During the safety qualification of this blade, the following on-board locations were identified
as critical with regards to the maximum temperature during blade operation. To guarantee
proper blade operation and to ensure safety, you have to make sure that the temperatures at
the locations specified in the following table are not exceeded. If not stated otherwise, the
temperatures should be measured by placing a sensor exactly at the given locations.
If you integrate the blade in your own system, contact your local sales representative for
further safety information.
Figure 2-8 Air Flow Graph
Table 2-23 Critical Temperature Limits
Component Thermal Design Power
Maximum Case or Junction
Temperature
Cavium CN6880 PP1 72 W Tj = 101°C
Cavium CN6880 PP2 72 W Tj = 101°C
DDR3 DIMM Modules 6.9 W Tc = 85°C
PCI-Express Switch 2.9 W Tj = 110°C
Ethernet Switch 33.5 W Tj = 115°C