Artesyn ATCA-9405 Installation and Use (May 2014) - Manual (Page 149)

Intelligent Peripheral Management Controller
ATCA-9405 Installation and Use (6806800M71G) 149
The following serial output selector assignments can be mapped to a serial connector type and
instance:
4 Serial connector type:
0 = Front panel connector
1 = RTM panel connector
2 = reserved
3 = Onboard device (that is, Terminal Server)
All other values are reserved.
5 Serial connector instance number. A sequential
number starts from zero.
6 Serial output selector. For more information, see
Table 8-14 on page 149 .
Response
Data 1 Completion Code
2 LSB of Artesyn IANA Enterprise Number. A value of
CDh is used
3 2nd byte of Artesyn IANA Enterprise Number. A value
of 65h is used.
4 MSB of Artesyn IANA Enterprise Number. A value of
00h is used.
Table 8-14 Serial Output Selector Assignments
Serial Output Source Serial Output Selector
Payload serial interface PP #0 00h
Payload serial interface PP #1 01h
IPMC serial interface 1 02h
reserved 03h
Payload serial interface SP 04h
reserved 05h - ffh
Table 8-13 Set Serial Output Command (continued)
Byte Data field