Artesyn ATCA-9405 Installation and Use (May 2014) - Manual (Page 49)

Setup
ATCA-9405 Installation and Use (6806800M71G) 49
2.3.4.1 IPMC Debug Console Header
A three pin header is provided to access IPMC debug console. The pin assignment is shown
below.
2.3.4.2 COP Header
A 16-pin header is provided for access to P2020 COP interface. The pin assignment is shown
below.
P7 16-pin Header, 1.27mm pitch P2020 COP interface
P8 16-pin Header, 1.27mm pitch Management and Payload Power JTAG interface
Table 2-17 Debugging Header (continued)
Location Type Description
Table 2-18 IPMC Debug Console Header Pin Assignment
Pin Signal
1 GND
3 IPMC_TXD
4 IPMC_RXD
Table 2-19 COP Header Pin Assignment
Pin Signal
1 TDO
2 QACK
3 TDI
4 TRST#
5 RUNSTOP
6 Target Power
7 TCK
8 CKSTP_IN#