Artesyn ATCA-9405 Installation and Use (May 2014) - Manual (Page 135)

Intelligent Peripheral Management Controller
ATCA-9405 Installation and Use (6806800M71G) 135
The SP provides 12 MAC addresses in its FRU information:
 2 x P2020 to the switch
 1 x P2020 to the front
 1 x Terminal Server
 3 x 2 CN6880 to the switch
 1 x 2 CN6880 to the front
8.8 Reset and Power Domains
The ATCA-9405 provides the following FRU instances:
 FRU #0: front board management and switch
 FRU #1: RTM
Table 8-8 Interface Type Assignments
Interface type Description
01h ATCA Base Interface
02h ATCA Base Interface
03h Front/Rear Panel
04h Mezzanine Module
05h Serial over LAN (SOL)
06h Fibre Channel / WWPN
07h AMC/MicroTCA Common Options Region
08h AMC/MicroTCA Fat Pipe Region
09h AMC/MicroTCA Extended Fat Pipe Region
10h ATCA Update Channel
11h Multi-type (Base, Fabric, and Update
channel (or two types of it) are connected
to a onboard switch)
11h - FFh reserved