Artesyn ATCA-9405 Installation and Use (May 2014) - Manual (Page 151)

Intelligent Peripheral Management Controller
ATCA-9405 Installation and Use (6806800M71G) 151
8.21.3 Set Feature Configuration
This command is used to enable/disable features within the IPMC during runtime.
4 Serial connector type:
0 = Front panel connector
1 = RTM panel connector
2 = reserved
3 = On-board device (that is, Terminal Server, P4080 COM #1 to Intel
COM #0)
All other values are reserved.
5 Serial connector instance number. A sequential number starts from
zero.
Response
Data 1 Completion Code
2 LSB of Artesyn IANA Enterprise Number. A value of CDh is used.
3 2nd byte of Artesyn IANA Enterprise Number. A value of 65h is used.
4 MSB of Artesyn IANA Enterprise Number. A value of 00h is used.
5 Serial output selector. For more information, see Table 8-14 on page
149 .
Table 8-15 Get Serial Output Command (continued)
Byte Data field
Table 8-16 Set Feature Configuration Command
Byte Data field
Request
Data 1 LSB of Artesyn IANA Enterprise Number. A value of CDh is used.
2 2nd byte of Artesyn IANA Enterprise Number. A value of 65h is used.
3 MSB of Artesyn IANA Enterprise Number. A value of 00h is used.
4 Feature Selector. For more information, see Table 8-17 on page 152 .