Artesyn ATCA-7365-CE Installation and Use (May 2014) - Manual (Page 75)

Controls, Indicators, and Connectors
ATCA-7365-CE Installation and Use (6806800L73J) 75
3.2.3.3 USB Connectors
The blade provides two USB connectors at its face plate. They are compliant to the USB 2.0
standard and correspond to the blade's USB interfaces 3 and 4. Their location is shown in the
following figure.
The pinout of each USB connector is given in the following.
Figure 3-10 Location of USB Connectors
Figure 3-11 USB Connector Pinout
Exceeding the maximum USB current rating of 500mA per Port will result in ATCA-7360
protecting itself through a controlled board shutdown.