1 installing the blade – Artesyn ATCA-7365-CE Installation and Use (May 2014) User Manual

Page 61

Hardware Preparation and Installation

ATCA-7365-CE Installation and Use (6806800L73J)

The blade can be installed in any AdvancedTCA node slot. Do not install it in an AdvancedTCA
hub slot.

2.6.1

Installing the Blade

To install the blade into an AdvancedTCA shelf, proceed as follows.

Damage of Circuits
Electrostatic discharge and incorrect blade installation and removal can damage circuits or
shorten their life.
Before touching the blade or electronic components, make sure that you are working in an
ESD-safe environment.

Blade Malfunctioning
Incorrect blade installation and removal can result in blade malfunctioning.
When plugging the blade in or removing it, do not press on the face plate but use the
handles.

This manual is related to the following products:

ATCA-7360 Installation and Use (May 2014) ATCA-7360 Installation and Use (February 2015) ATCA-7365-CE Installation and Use (Jan 2015) ATCA-7365 Installation and Use (November 2014) ATCA-7365 Installation and Use (May 2014)