Artesyn ATCA-7365-CE Installation and Use (May 2014) - Manual (Page 38)

Introduction
ATCA-7365-CE Installation and Use (6806800L73J) 38
1.2 Standard Compliances
The product is designed to meet the following standards.
Table 1-1 Standard Compliances
Standard Description
UL 60950-1
EN 60950-1
IEC 60950-1
CAN/CSA C22.2 No 60950-1 Legal safety requirements
CISPR 22
CISPR 24
EN 55022
EN 55024
FCC Part 15
EN 300386 EMC requirements on system level (predefined Artesyn
Embedded Technologies system)
ISO 8601 Y2K compliance
PICMG 3.0 1 and 3.1
1. Environmental conditions and supply voltage do not entirely follow the PICMG 3.0 but are adapted to data center
application requirements.
Defines mechanics, blade dimensions, power distribution,
power and data connectors, and system management
 The product has been designed to meet the directive on the restriction of the use of
certain hazardous substances in electrical and electronic equipment (RoHS) Directive
2011/65/EU.
 To fulfill the requirements of Telcordia GR-1089,R4-14, use Shielded Twisted Pair (STP)
cables grounded at both ends to connect to the Ethernet ports.