12 advanced -> local ipmi system event log, 13 advanced -> whea configuration, 3 ipmi – Artesyn ATCA-7365-CE Installation and Use (May 2014) User Manual
Page 112: 1 ipmi -> ipmi watchdog configuration, Table 4-20, Advanced -> local ipmi system event log, Table 4-21, Advanced -> whea configuration, Table 4-22, Ipmi -> ipmi watchdog configuration
BIOS
ATCA-7365-CE Installation and Use (6806800L73J)
112
4.5.2.12 Advanced -> Local IPMI System Event Log
4.5.2.13 Advanced -> WHEA Configuration
4.5.3
IPMI
4.5.3.1
IPMI -> IPMI Watchdog Configuration
Table 4-20 Advanced -> Local IPMI System Event Log
Item
Values
Description
Erase Local SEL
No (Default),
Yes On next reset, Yes On
every reset
Choose options for erasing local SEL.
This option does not take effect until the computer is
restarted.
Table 4-21 Advanced -> WHEA Configuration
Item
Values
Description
WHEA Support
Enable,
Disable (Default)
Enable or disable support for Windows Hardware Error
Architecture.
Table 4-22 IPMI -> IPMI Watchdog Configuration
Item
Values
Description
POST Timer (FRB2)
Enable,
Disable (Default)
Enable or Disable FRB2 timer (POST timer).
This watchdog monitors BIOS initialization tasks.
FRB2 Timer timeout
3, 4, 5, 6 minutes
Default 6 minutes
Enter value Between 3 to 6 min for FRB2 Timer Expiration
value.
Not available if Frb2 Timer is disabled.