beautypg.com

2 processor, 3 memory, 2 processor 5.3 memory – Artesyn ATCA-7365-CE Installation and Use (May 2014) User Manual

Page 144

background image

Functional Description

ATCA-7365-CE Installation and Use (6806800L73J)

144

5.2

Processor

ATCA-7365-CE provides either two Intel Xeon E5645 six-core processors or two Intel Xeon
E5620 four-core processors as the central processing unit (CPU). Both CPUs are based on 32
nm process technology and provide the following main features:

2.4 GHz core frequency

32 KB instruction cache per core

32 KB L1 data cache per core

256 KB mid level cache per core

12 MB L3 cache shared among the six cores

The processor features two Intel QuickPath Interconnect point-to-point links capable of up to
5.86 GT/s, 12 MB of shared Last Level cache (L3), and an Integrated Memory Controller (IMC).
The processor support all the existing Streaming SIMD Extensions 2 (SSE2), Streaming SIMD
Extensions 3 (SSE3) and Streaming SIMD Extensions 4 (SSE4). The processor support several
Advanced Technologies: Execute Disable Bit, Intel 64 Technology, Enhanced Intel SpeedStep
Technology, Intel Virtualization Technology (Intel VT), and Simultaneous Multi Threading
(SMT).

5.3

Memory

The Xeon CPU features an integrated memory controller. The memory controller provides
three memory channels that allow flexible memory configurations. DDR3 DIMM technology is
exclusively supported. Different types of memory modules can be installed including
registered DIMMs with ECC and un-buffered DIMMs with either ECC or non-ECC. The DIMM
speeds can be either DDR3-800, DDR3-1066 or DDR3-1333 (not for E5620 processor). DIMMs
of different speed selections can coexist but the lowest speed selection will determine the used
speed for all memory channels. Note that not all processor variants support all three memory
clock speeds.

ATCA-7365-CE supports Low voltage LVDDR3 Memory running at 1.35 V which reduces
power consumption and improves thermal performance of the blade.

Either the normal DDR3 (1.5 V) or the LVDDR3 (1.35V) can be used. Mixing is not possible.