Artesyn ATCA-7365-CE Installation and Use (May 2014) User Manual

Page 222

Text mode
Original mode

Serial Over LAN

ATCA-7365-CE Installation and Use (6806800L73J)

222

6. Start ATCA-7365-CE SOL session on your target with the ipmitool and the

configured IP address for the ATCA-7365 SOL interface.
ipmitool -C 1 -I lanplus -H 172.16.0.221 -U soluser -P

solpasswd -k gkey sol activate
For details on the command parameters, refer to the ipmitool documentation
available on

http://ipmitool.sourceforge.net

To access BIOS setup screen, it is necessary to reset the payload. SOL session is only available
if the payload is powered on and initialized by the BIOS.

This manual is related to the following products:

ATCA-7360 Installation and Use (May 2014) ATCA-7360 Installation and Use (February 2015) ATCA-7365-CE Installation and Use (Jan 2015) ATCA-7365 Installation and Use (November 2014) ATCA-7365 Installation and Use (May 2014)