Artesyn ATCA-7365-CE Installation and Use (May 2014) - Manual (Page 133)

BIOS
ATCA-7365-CE Installation and Use (6806800L73J) 133
4.12.4.9 System Boot
This log entry is the first entry on a system boot.
4.12.4.10 OEM Event EFI Status Code
EFI status codes are logged when "Convert OEM Codes" in "Smbios Event Log Settings" BIOS
setup menu is set to disabled. In this case, no SMBIOS POST Error Event and no CPU Failure
Events are generated.
Table 4-45 System Boot Event Format
Offset Name Format Description
00h Event Type BYTE Event Type = 17h
01h Length BYTE always 08h
02h-07h Date/Time Fields BYTE These fields contain the BCD
representation of the date and time
Table 4-46 System Boot Event Format
Offset Name Format Description
00h Event Type BYTE Event Type = E0h
01h Length BYTE always 14h
02h-07h Date/Time Fields BYTE These fields contain the BCD
representation of the date and time
08h-0Bh Status Code Type UINT32 Error Code Severity
0Ch-0Fh Status Code Value UINT32 Error Code Value
10h-13h Instance UINT32 Additional Information e.g. DIMM Socket
number