Artesyn ATCA-7365-CE Installation and Use (May 2014) - Manual (Page 241)

Supported IPMI Commands
ATCA-7365-CE Installation and Use (6806800L73J) 241
8.3.1.1.2 Response Data
The following table lists the response data applicable to the Set Serial Output command.
8.3.1.2 Get Serial Output Command
The Get Serial Output Command provides a way to determine which serial output source goes
to a particular serial port connector.
6 Serial output selector
0: BIOS
2: IPMC debug console
All other values are reserved.
Table 8-20 Request Data of Set Serial Output Command (continued)
Byte Data Field
Table 8-21 Response Data of Set Serial Output Command
Byte Data Field
1 Completion code
2 LSB of Artesyn Embedded Technologies IANA Enterprise number.
3 Second byte of Artesyn Embedded Technologies IANA Enterprise number.
4 MSB of Artesyn Embedded Technologies IANA Enterprise number.
Currently, only BIOS output is supported.