Artesyn ATCA-7365-CE Installation and Use (May 2014) - Manual (Page 50)

Hardware Preparation and Installation
ATCA-7365-CE Installation and Use (6806800L73J) 50
2.2.2 Power Requirements
The blade's power requirements depend on the installed hardware accessories. If you want to
install accessories on the blade, the load of the respective accessory has to be added to that of
the blade. In the following table you will find typical examples of power requirements with and
without accessories installed. For information on the accessories' power requirements, refer to
the documentation delivered together with the respective accessory or consult your local
Artesyn Embedded Technologies representative for further details.
Table 2-3 Power Requirements
Characteristic Value
Rated Voltage -48 VDC
Operating Voltage -38.4 VDC to -57.6 VDC
Max. power consumption of ATCA-7365-CE (with RTM-
ATCA-7360 including a SAS HDD) 300 W (typ. 240 W)
Max. power consumption of ATCA-7365-CE (without
RTM-ATCA-7360 ) 280 W (typ. 220 W)