Artesyn ATCA-7365-CE Installation and Use (May 2014) - Manual (Page 111)

BIOS
ATCA-7365-CE Installation and Use (6806800L73J) 111
4.5.2.11 Advanced -> SMBIOS Event Log
4.5.2.11.1 Advanced -> SMBIOS Event Log -> SMBIOS Event Log Settings
See also SMBIOS Error Logging on page 126
PCI Error Logging Enabled (Default)
Disabled Enable/Disable PCI Error Logging.
Error Threshold 1…1000,
Default 10 Memory Correctable Error Threshold value. Range
[1..1000] Default 10.
Error Logging Limit 1…20
Default 10 Memory Correctable Error Logging Limit value. Range
[1..20] Default 10.
Table 4-18 Advanced -> Runtime Error Logging
Item Values Description
Table 4-19 SMBIOS Event Log -> SMBIOS Event Log Settings
Item Values Description
SMBIOS Event Log Enabled (Default)
Disabled Change this to enable or disable all features of SMBIOS
Event Logging during boot.
Erase Event Log No (Default),
Yes On next reset, Yes On
every reset Choose options for erasing SMBIOS Event Log. Erasing is
done prior to any logging activation during reset.
When Log is Full Do Nothing (Default),
Erase Immediately Choose options for reactions to a full SMBIOS Event Log.
This option does not take effect until the computer is
restarted.
Log EFI OEM Errors Enabled (Default)
Disabled Enable or disable the logging of EFI Error Codes as OEM
Codes.
Convert OEM Codes Enabled (Default)
Disabled Enable or disable the converting of EFI Error Codes to
Standard SMBIOS Types. EFI Errors which cannot be
translated are logged as SMBIOS Post Errors.
Inject Errors Enabled
Disabled (Default) Inject Errors before booting a OS: Following errors are
injected: No Console found, IPMI Boot Parameter
Checksum error, CPU Self test failure, Bad Battery.