3 watchdog commands, Table 8-3, Supported watchdog commands – Artesyn ATCA-7365-CE Installation and Use (May 2014) User Manual
Page 224: Supported ipmi commands
Supported IPMI Commands
ATCA-7365-CE Installation and Use (6806800L73J)
224
8.1.3
Watchdog Commands
The watchdog commands are supported by blades providing a system interface and a
watchdog type 2 sensor.
The options pre-timeout and power-cycle are not supported.
Set Channel Access
0x06/0x07
0x40
Get Channel Access
0x06/0x07
0x41
Get Channel Info
0x06/0x07
0x42
Set User Access
0x06/0x07
0x43
Get User Access
0x06/0x07
0x44
Set User Name
0x06/0x07
0x45
Get User Name
0x06/0x07
0x46
Set User Password
0x06/0x07
0x47
Set User Payload Access
0x06/0x07
0x4C
Get User Payload Access
0x06/0x07
0x4D
Set Channel Security Keys
0x06/0x07
0x5C
Table 8-2 Supported System Interface Commands (continued)
Command
NetFn (Request/Response)
CMD
Table 8-3 Supported Watchdog Commands
Command
NetFn (Request/Response)
CMD
Reset Watchdog Timer
0x06/0x07
0x22
Set Watchdog Timer
0x06/0x07
0x24
Get Watchdog Timer
0x06/0x07
0x25