18 set payload shutdown time-out command, 19 get module state command, Table 8-43 – Artesyn ATCA-7365-CE Installation and Use (May 2014) User Manual

Page 259: Set payload shutdown time-out command description, Table 8-44, Get module state command description, Ime-out, Supported ipmi commands

Supported IPMI Commands

ATCA-7365-CE Installation and Use (6806800L73J)

259

8.4.18 Set Payload Shutdown Time-Out Command

The Set Payload Shutdown Time-Out command is defined as follows.

8.4.19 Get Module State Command

The Get Module State command is used to query the state of a module (RTM with site ID1)
using any of the external interfaces.

Table 8-43 Set Payload Shutdown Time-Out Command Description

Type Byte

Data

Field

Request Data

1:3

PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00

4:5

Time-Out measured in hundreds of milliseconds, LSB first

Response Data

Completion Code

2:4

PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 2 = 0A, byte 3 = 40, byte 4 = 00

Table 8-44 Get Module State Command Description