Artesyn ATCA-7365-CE Installation and Use (May 2014) - Manual (Page 115)

BIOS
ATCA-7365-CE Installation and Use (6806800L73J) 115
4.5.5 Boot
4.5.5.1 Boot -> Option ROM Execution
Table 4-25 Boot
Item Values Description
Setup Prompt Timeout 0..65535 seconds
Default 2 seconds Number of seconds to wait for setup activation key.
65535(0xFFFF) means indefinite waiting.
Bootup NumLock State On/off
Default on Select the keyboard NumLock state.
Interrupt 19 Capture Enable,
Disable (Default) If enabled, allows Option ROMs to trap Int 19. This is
needed e.g. for some SCSI/SAS controller.
Boot Option Priorities Select the boot device order.
Table 4-26 Boot -> Option ROM Execution
Item Values Description
Front Panel Net Boot Enabled (Default),
Disabled Controls execution of the Option ROM for the Front Panel
Ethernet controller. Select Enabled when Front Panel
Boot is required.
Base Network Boot Enabled (Default),
Disabled Controls execution of the Option ROM for both Base
Network Ethernet controller. Select Enabled when Base
Network Boot is required.
Fabric Network Boot Enabled (Default),
Disabled Controls execution of the Option ROM for both Fabric
Network Ethernet controller. Select Enabled when Fabric
Network Boot is required.
ARTM Network Boot Enabled,
Disabled (Default) Controls execution of the Option ROM for RTM Network
Ethernet controller. Select Enabled when RTM Network
Boot is required.
ARTM SAS Boot Enabled (Default),
Disabled Controls execution of the Option ROM for RTM SAS
controller. Select Enabled when RTM SAS Boot is
required.