Adept DeskTop 4.3 - Manual (Page 142)

Adept DeskTop 4.3 - Online Help 142
Option Descriptions
Scope
Scope options determine whether to save all configuration changes made or only made on the
current configuration page.
Write changes from current page
Select this option to save only changes from the current configuration page. The name of the
current page is displayed in parentheses.
Write all changes
Select this option to save all changes on the current configuration page along with any other
parameter changes you have made on other pages.
Destination
Destination options determine whether the configuration data is committed to the non-volatile
memory on the controller.
Write changes to temporary memory only
Writes the changes to the RAM on the controller. When the controller is rebooted, the changes
will be lost.
Write changes to permanent memory
Saves the configuration data to the non-volatile memory (NVRAM). When the controller is
rebooted the updated configuration data is loaded.
Servo Reset
Servo Reset options determine whether the servos are reset when the configuration data is
written to the controller.