Adept DeskTop 4.3 - Manual (Page 101)

Adept DeskTop 4.3 - Online Help 101
Switches and Parameters Control
The Switches and Parameters control is used to access all available switches and parameters for the
current controller connection. Only available/public switches and parameters are displayed.
• You can set parameter values or enable and disable switches in the Switches and Parameters
control.
• Like the Keyword Browser, this control provides help on the syntax and use of parameter and
switch keywords.
To open the Switches and Parameters control:
1. From the menu select: View > System Resources > Switches and Parameters.
2. Alternatively, from the Adept DeskTop toolbar, click Open Switches and Parameters
Figure 69 V+ Parameter Displayed in the Switches and Parameters Control
Value
The Value text box shows the current value of a selected parameter.
To modify the value of a selected parameter:
• Entering a new value or select a value.
• Upper and lower limits for the value are expressed to the right of the text box.
State
The State field displays the state of a selected parameter.
To change the state of a selected switch:
• Enable the switch by checking the Enable check box.
• Disable the switch by unchecking the Enable check box.
Description of the selected
parameter
Value and value limits of the
selected parameter
Context help opens help for
selected switch or parameter
Toolbar